What Is E-Z Pool?
It is a NON-CHLORINE system that contains a clarifier, an oxidizer, a scale inhibitor, an algae shield, and a water toner in its chemicals. It’s an all-in-one product.

How Do I Keep My Pool Clean?

• A. Keep your PH and alkalinity balanced.
• B. Make sure your calcium hardness is correct.
• C. Add E-Z Pool once per week – so E-Z!

E-Z Pool Usage Chart

Chemical Cost Comparison

E-Z POOL START-UP

Pool Size (gallons) ___________

Day 1:
You can test your water for balance at any Aqua Leisure Pools and Spas location. This is a must! We need to use the Water Testing Computer to tell you what to add to balance your water.

Day 2:

Balance pool water according to need. We’ll fill in these numbers.

CH reading should be a min. 350 if not add Calcium Hardness (CH), ____ Ibs. and wait 4 hours.

(Note: Add calcium at the rate of 10 Ibs. per 4 hours to avoid clouding pool water.)

ALK reading should be 80-120 if not add Alkalinity up, ____ Ibs. if needed and wait 8 hours.

PH reading should be 7.2 to 7.6 if not then, add PH up, ____ Ibs. if needed and wait 8 hours.

Day 3:

Test to see that initial balance is in line: minimum CH 350 ppm, Alkalinity 80 -120 ppm, PH 7.2 – 7.6, then dose with ___ scoops E-Z POOL (fill to scoop line) and add __ Assist tablet to skimmer or chlorinator (Replace when dissolved).

Weekly thereafter, repeat Day 3. On a monthly basis, have your water tested for balance.

“E-Z Pool – It’s like swimming in bottled water.” Now you want to know how to prepare your pool for weather events.